Not just the best, but the best looking programmer now available. Simple to install, this ultra-modern device is designed from the ground up to compliment your truck. The Evolution Programmer delivers substantial power gains, provides display technology and is shipped with a custom pod to look factory installed.
When used in its programmer mode, the Edge Evolutions provides 3 power levels (transmission only, tow and performance) designed to extract the most performance from the fuel you are using. With gains up to 35 HP and 50 ft. lbs. of torque, you will feel like you put a new engine in your truck.
The Evolution also provides a special mileage tune designed to extract maximum performance from low-octane fuel. Going from one power level to another has never been easier - the Evolution programs in under 20 seconds. You can also calibrate for different tire sizes and gear rations, and change speed and rev limiters. When used as a scan tool, the Edge Evolution allows the user to check and clear diagnostic trouble codes with simple, clear text descriptions of the error.
components and output values. The following parameters can be displayed on the main Evolution screen (maximum 4 at one time):
RPM
MPH
Engine Coolant Temp
Engine Oil Temp
Transmission Fluid Temp
Cylinder Head Temp
Air Intake Temp
Line Pressure Control Desired
Fuel Rail Pressure
Output Shaft Speed
Turbine Shaft Speed
Manifold Air Flow
Manifold Air Flow Sensor Voltage
Variable Cam Timing Actual Advance
Spark Advance
Torque fuel/spark Limiting Status
Fuel Economy
Engine Load
Accelerator Pedal Position
Battery Voltage
Keep track of your performance by recording maximum/minimum for a variety of parameters including:
Max Engine Temp
0-60 times
mile times
Max RPM
Max Speed
Engine Coolant Temp
Engine Oil Temp
Transmission Fuel Temp
Cylinder Head Temp
Air Intake Temp
See All »
