Toyota 4Runner 96-02
Description: This 2 Pin Spanner Wrench is a must to adjust your ICON Coil-over Shocks. The Two Pin deisgn makes it easier to adjust no matter how much room you have to insert the wrench.
Item #: IVD 19-8000
Condition:
New
Description: WHEEL SIZE: Maximum recommended wheel size, 15x8" or 16x8", medium off-set
Features:
- Same proven front lift design as the Tacoma and Tundra kits
- Works on manual or automatic hubs
-...
More Details »
Item #: 430
Condition:
New
Description: 883 --- Front Coil Springs Used alone as leveling coils (approx. 1 1/2") for 07-09 FJ Cruiser, 05-09 Tacoma, & 03-09 4-Runner. Also sold as MED coils for 95.5-04 Tacoma & 96-02 4-Runner
Item #: OME-883 (Ta)
Condition:
New
Description: The factory coil buckets have a tendency to flex and distort resulting in a bent or broken upper shock mount tower. We now offer a weld on gusset that is designed to mount the upper control arm...
More Details »
Item #: 59651
Condition:
New
Description: Included in kit: 1" Body lift for 96-02 4Runner. Steering shaft extension (not pictured). Large UHMW Polyurethane spacers and grade 8 hardware
Item #: 96B1-K
Condition:
New
Description: 95-04 Tacoma = 3" lift
96-02 4Runner 3" lift
05-10 Tacoma and FJ 1.6" lift
620LB coils will support additional weight without sagging
Can be used with Bilstein Height...
More Details »
Item #: 892-620 (4R)
Condition:
New
Description: Front ride Height / preload adjustable shocks
5100 series with silver / zinc plate finish
Settings for stock, 1.25" (for leveling) or 2.5"lift in one shock
Sold in sets of 2.
Item #: D-558 (4R)
Condition:
New
Description: Solid steel weld on Lower control arm skids for the rear of your 96-02 4Runner! Protects the vulnerable rear lower control arms on these models. Extends past the tube weld onto the mounting point...
More Details »
Item #: LCAS-2
Condition:
New
Description: These are a longer rear Bilstein 5125 series shock for improved flex off road. Comes with proper bushings and eye to stud adaptors as shown. Great ride on/off road. Fits 96-02 4Runner with 3" rear lift only
Item #: 4R96-BIL
Condition:
New
Description: Heavy duty Lower control arms for 96-02 4Runner
These LCAs have a highly flexible (30 degrees) Johnny Joint on the frame end and urethane bushings on the axle end.
Between the joints is 1.5" .250" (1/4") wall DOM tubing.
Item #: LCA-9602
Condition:
New
Description: Tighten sloppy steering with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed steering response through a...
More Details »
Item #: 96701 (4R)
Condition:
New
Description: 2.5" Lift Front Coil Spring Spacer Kit-- CNC Machined From 6061 T-6 Aluminum.
Designed for stock shocks
Item #: TAC25 (4R1)
Condition:
New
Description: FRONT: (2)2.5" Front Lift Spacers-- CNC Machined From T-6 6061 Aluminum.
REAR: (2) Light Duty 3" Lift OME 890 Coils.
Item #: RUN25
Condition:
New
Description: These 2.5" Diameter Shocks for the 3rd Generation 4Runners will not only improve your offroad performance and ride quality, but they will enhance your daily street driving as well. These shocks...
More Details »
Item #: IVD 5-7700
Condition:
New
Description: 2" Lift Front Coil Spring Spacer Kit-- CNC Machined From 6061 T-6 Aluminum.
Designed for stock shocks
Item #: TAC2 (4R1)
Condition:
New
See All »
