Custom Truck Parts, 4x4 Truck Parts & Fabrication by Eastside Custom Truck

- Adjustable for 0 to 3 1/2" front lift
- Superior ride & flex on/off road
- Complete bolt on front lift!
- Comes assembled and preset to 2 1/2" front lift
- This part number is specifically valved for 06-07 FJ cruiser

Ext. 42.52 Col. 26.54

Rockbuster Series 2.5"

Body: 2.5, Conventional Tube Rod: 0.625", 0.875” and 1.0” Polished Nitrosteel

Rod Guide: Brass and Teflon coated bush.

Seal: Rebuildable dual Quad rings.

Piston: Radflo "Freeflo" Racing Piston.

Valving: 5 and 6 stage Velocity Sensitive Independent Rebound & Compression.

Oil: "Radflo" Foam Resistant High Temperature Suspension Fluid.

Hose: -6 and -8 High Pressure Hose.

Rod Ends: Com 8 and Com10 Bushed Teflon lined Spherical Plain with CNC

Machined Rod Ends. 12mm also available.

Finish: Cadmium.

This 2 Wheel Drive Uniball Toyota Kit Includes the Following; Upper A-Arms w/ Bushings, Uniballs, & Clips Lower A-Arms w/ Bushings, Uniballs, Bump Stops & Shock Mounts Strut Frame Braided Stainless Brake Lines Chromoly Tie Rods w/ Jam Nuts 3/4 X 5/8 Chromoly Rod Ends Hardware Weld-On Droop Stops The Kit Will Also Require; Shocks Torsions Bars Upper Shock Mounts Fiberglass Fenders 84-88 Model Trucks require a 2+" Body Lift to run 31X10.5 tires Recommended Shock / Spring Set Up Shock Specs: Single 10" Travel 2.5" Coil Over Shock or Dual 2.0" Dual 10" travel 2.0" Torsion Bars: S-A-W 25mm / 26mm Coil Spring: 500lb - 700lb 84-88 trucks require 89-95 Toyota lower Ball Joints and may require a Body Lift to run a 31" Tire. Please specify v-6 or 4cyl engine Upgrades Billet Cross Shafts- HIGHLY RECOMMENDED King Kong Steering System Heim Joint Tie-Rod Upgrade 22R/22RE Solid Motor & Trans. Mount Kit Weld-On Dual (2.0) Shock Tower Spindle Core Charge of $200

Adjustable lift from 0 to 3" lift These shocks offer an unbeatable ride

- BILSTEIN SHOCKS replace your stock shocks, and coils.
- Complete units Fully assembled, with coils. - Ready to bolt on!

Tube gussett for 1-1/2", 1-5/8" abd 1-3/4" tubing and joint angles from 70-90 degrees. The ultimate wrap around gusset for your tubing project.